ARSET WATERPROOF Series

Waterproofing Admixtures

PRODUCT DESCRIPTION

ARSET WATERPROOF SERIES products are waterproof additives specially developed for concrete.

TECHNICAL PROPERTIES

Chemical Base

Organic-Inorganic material mixtures

Color / Appearance

Homogeneous liquid

Chlorine Content (%)

<0,1 (EN 480-10)

Alkaline Content (%)

<10,0 (EN 480-12)

Corrosion Behavior

Contains only components according EN 934-1 Annex A.1

Dangerous Substances

Comply with annex AZ
COMPLIANCE WITH STANDARDS
Arset Waterproof Series     TS EN 934-2    
           
Advantages
  • Use all types of cements.
  • Improves workability of concrete.
  • Enables easy placement and compaction of concrete.
  • Helps to achieve a denser concrete and smooth surface.
  • Increases water tightness.
  • Improves durability and strength of concrete.
  • Do not contain chloride or any other components that result in corrosion in the reinforcements. Therefore, it is suitable for use in reinforced concrete structures.
Areas of Use
  • Water tanks
  • Canals
  • Water structures
  • Swimming pools
  • Wastewater treatment pools
  • Tunnels and culverts
  • All concrete structures where waterproofing is required
Terms of Use

Concrete mix design and admixture dosage should be determined by laboratory tests according to the concrete class and properties.

Consumption Dosage

ARSET WATERPROOF SERIES products’ dosage should be adjusted according to the total amount of binder in the mixture design. This ratio varies according to the cement, aggregate, mineral additive, water components used in concrete mixture design and also the desired fresh and hardened concrete properties. Therefore, before determining the usage rate, laboratory tests should be made according to the properties expected from fresh and hardened concrete and the mixing ratio should be determined according to these tests.

Method of Application

ARSET WATERPROOF SERIES products must be added to the mixing water.

Compatibility with Other Admixtures

ARSET WATERPROOF SERIES products can be combined with the following admixtures. Laboratory tests should be carried out before use.

  • Arstep / Arstep Extra / Degaset Series Products
  • Arset Air Series
  • Arset Zero Series

 

Packaging
  • 30 kg plastic drum
  • 250 kg drum
  • 1000 kg container
Storage and Shelf Life

Shelf life is 12 months from the date of production when stored in original unopened and undamaged packages (drums, barrels, IBC containers) at temperatures between +5°C and +35 °C, protecting from direct sunlight, excessive heat and frost.

If the product has waited for a long time, make it homogeneous by mixing slowly at low speed with mechanical methods before using the product.

Make sure that the product does not freeze. If the product freezes, it should be thawed by keeping it at room temperature without using direct heat and mixed by mechanical methods until it becomes homogeneous.

Safety Measures

Use protective clothes, gloves, glasses and mask compatible with health and safety regulations during the application. Avoid direct contact with eyes and skin during storing and application, in case of contact wash off thoroughly with soap and water, if ingested seek medical attention immediately. Store away from all foodstuffs. Keep away from children. ARSET WATERPROOF SERIES products are not flammable. For detailed safety information please consult the product’s Safety Data Sheet (SDS).

PRODUCT OF

SERIES

You can contact us to access the Safety Data Sheet.