ARSET LUB Series

The consumption varies depending on the condition, surface, type and separation method of the mold.

• The molds should be properly cleaned prior to using. Molds should be free from water and dust.

• It should be stirred thoroughly before application. It should be applied by spraying or with brush-roller.

• It can be applied in one or two layers depending on the condition of the mold.

• Concrete should not be poured immediately into a newly greased mold; please wait for at least 3 hours.

• Pay attention to the formation of ponding on horizontal surfaces.

Shelf life is 24 months from the date of production when stored in original unopened and undamaged packages (drums, barrels, IBC containers) at temperatures between +5 °C and +35 °C, protecting from direct sunlight, excessive heat and frost.

If the product has waited for a long time, make it homogeneous by mixing slowly at low speed with mechanical methods before using the product.

Make sure that the product does not freeze.

Use protective clothes, gloves, glasses and mask compatible with health and safety regulations during the application. Avoid direct contact with eyes and skin during storing and application, in case of contact wash off thoroughly with soap and water, if ingested seek medical attention immediately. Store away from all foodstuffs. Keep away from children. ARSET LUB SERIES products are not flammable. For detailed safety information please consult the product’s Safety Data Sheet (SDS).