ARSET AIR Series

• It is suitable for use with all types of concrete with or without additives.

• It is used with air entrainment to increase its freeze-thaw resistance.

• The amount and type of aggregate used, cement dosage, cement type, fineness, consistency, water / cement ratio and temperature may negatively affect the amount of air; in such cases, the additive dose may need to be increased.

• Avoid evaporation of the mixing water in the concrete at high temperatures. During the curing phase, curing can be used to prevent rapid evaporation of moisture in the concrete and crack formation.

• Steel, polypropylene and organic fibers can be used against shrinkage cracks.

• It is recommended to carry out tests before using the products.

• It is suitable for use with all types of concrete with or without additives.

• It is used with air entrainment to increase its freeze-thaw resistance.

• The amount and type of aggregate used, cement dosage, cement type, fineness, consistency, water / cement ratio and temperature may negatively affect the amount of air; in such cases, the additive dose may need to be increased.

• Avoid evaporation of the mixing water in the concrete at high temperatures. During the curing phase, curing can be used to prevent rapid evaporation of moisture in the concrete and crack formation.

• Steel, polypropylene and organic fibers can be used against shrinkage cracks.

• It is recommended to carry out tests before using the products.

ARSET AIR SERIES products are used by adding the mixing water before it is added to the aggregate. It should not be added over the dry mixture. When used with other additives, each additive must be added to the mix individually.

Shelf life is 12 months from the date of production when stored in original unopened and undamaged packages (drums, barrels, IBC containers) at temperatures between +5 °C and +35 °C, protecting from direct sunlight, excessive heat and frost.

If the product has waited for a long time, make it homogeneous by mixing slowly at low speed with mechanical methods before using the product.

Make sure that the product does not freeze. If the product freezes, it should be thawed by keeping it at room temperature without using direct heat and mixed by mechanical methods until it becomes homogeneous.

Use protective clothes, gloves, glasses and mask compatible with health and safety regulations during the application. Avoid direct contact with eyes and skin during storing and application, in case of contact wash off thoroughly with soap and water, if ingested seek medical attention immediately. Store away from all foodstuffs. Keep away from children. ARSET AIR SERIES products are not flammable. For detailed safety information please consult the product’s Safety Data Sheet.